OEM/ODM China Donfoam 601 Water Base Blend Polyols - Doncool 103 CP/IP base blend polyols – INOV

Doncool 103 CP/IP base blend polyols

INTRODUCTION

Doncool 103 is blend polyols uses CP or CP/IP as blowing agent, which applies to refrigerators, freezers, and other insulation products. The characteristics of the products are as follows

1. Excellent flow ability, the density of the foam is well-distributed, and the thermal conductivity is low

2. Excellent low-temperature dimensional stability and good cohesiveness;

3. Demoulding time is 6-8 minutes.

PHYSICAL PROPERTY

Appearance               

Pale yellow transparent liquid

Hydroxyl value            mgKOH/g

360-420

Dynamic viscosity(25℃)   mPa.S

3000-4000

Specific gravity   (20℃)     g/ml

1.06-1.08

Storage temperature           ℃

10-25

Pot life                        Month

6

RECOMMENDED RATIO

 

pbw

Doncool 102

100

CP or CP/IP

12-14

Isocyanate

136-142

TECHNOLOGY AND REACTIVITY (the actual value varied as per process conditions)

 

Manual mixing

High pressure machine

Material Temperature      ℃

20-25

20-25

Mould Temperature        ℃

35-40

35-40

Cream time                 s

12-16

8-12

Gel time                 s

75-85

50-70

Tack free time             s

100-120

70-100

Free density            kg/m3

25-26

24-25

FOAM PERFORMANCES

Mold density GB/T 6343 ≥35kg/m3
Closed-cell rate GB/T 10799

≥90%

Thermal conductivity     (15℃) GB/T 3399 ≤22 mW/(m.K)
Compression strength GB/T8813 ≥150kPa
Dimensional stability 24h  -20℃ GB/T8811

 ≤0.5%

                 24h  100℃

≤1.0%

The data provided above are typical value, which are tested by our company. For our company's products, the data included in the law do not have any constraints.