High Performance Inov Polymeric Blended Blend Polyether Polyol

Product Detail

Special Series

INTRODUCTION This series of polyether polyols is designed according to the individual needs of customers. They are mostly 2 or 3 functionality with different molecular weight from 400 to 5000. APPLICATION Widely used for producing Polyurethane elastomers, coating, sealant, adhesive. And also can be in rigid foam system to reduce the viscosity of the system. Some of them can be used to produce OCF and MS sealant. TECHNICAL DATA SHEET

Brand	Colour (APHA)	OHV (mgKOH/g)	Viscosity (mPa.s/25℃)	H₂O content (%)	Acid Value (mgKOH/g)	PH	K+ (mg/Kg)	Application
INOVOL S207H	≤100	150-170	2300-3000	≤0.02	≤0.05	5.0-7.0	-	Used for polyurethane elastomers, coatings, OCF Styrofoam, adhesives, etc.
INOVOL S210H	≤50	107-116	1200-1600	≤0.02	≤0.05	5.0-7.0	-	Used for polyurethane elastomer chain extension agent, polyurethane adhesive etc., to improve hardness, mechanical properties and adhesion strength.
INOVOL S215H	≤50	72.0-76.0	800-1100	≤0.02	≤0.05	5.0-7.0	-	Used for polyurethane elastomers, adhesives, sealants, coatings, waterproof coating, leather slurry etc., to improve the adhesion.
INOVOL S220H	≤50	54.0-58.0	780-980	≤0.02	≤0.05	5.0-7.0	-	Used for polyurethane elastomers, adhesives, sealants, coatings, waterproof coating, leather slurry etc., to improve the adhesion.
INOVOL S303A	≤50	535-575	200-400	≤0.10	≤0.20	5.0-7.5	≤80	High activity polyether polyol, used for polyurethane crosslinking agent.
INOVOL S2000T	≤50	53.0-59.0	1500-2500	≤0.02	≤0.05	5.0-7.0	-	Used for polyurethane foams, water-based adhesives, elastomers, adhesives, etc. to improve the mechanical properties, adhesion, weather resistance
INOVOL S2500T	≤200	42.5-47.5	1000-1800	≤0.02	≤0.05	5.0-7.0	-	Used for polyurethane foams, water-based adhesives, elastomers, adhesives, etc. to improve the mechanical properties, adhesion, weather resistance
INOVOL S5000T	≤50	32.0-36.0	1100-1500	≤0.08	≤0.08	5.0-7.5	≤5	Foam-opening agent for high resilience foams to improve the open ability of foam and reduce foam shrinkage
INOVOL S25K	≤30	22.5-27.5	2000-2400	≤0.08	≤0.08	5.0-7.5	≤5	Foam-opening agent for high resilience foams to improve the open ability of foam and reduce foam shrinkage
INOVOL S350T	≤50	32.0-36.0	1100-1500	≤0.08	≤0.08	5.0-7.5	≤5	Foam-opening agent for high resilience foams to improve the open ability of foam and reduce foam shrinkage
INOVOL S01X	≤50	54.0-58.0	400-700	≤0.05	≤0.05	5.0-7.0	-	Used as defoamer