China Cheap price Ms Sealant 930 - DDPU-301 polyurethane grouting material for rescue and relief – INOV

DDPU-301 polyurethane grouting material for rescue and relief

INTRODUCTION

DDPU - 301 is a two-component hydrophobic polyurethane grouting material,designed for rescue and relief . The material have a very short reaction time and quickly transform from a liquid to their final foam form. This material can not only waterproof plugging, but also has a certain reinforcement and stabilization effect. It has been widely used in subway tunnels, water conservancy and hydropower, underground garage, sewer and other fields of waterproof leakage-plugging.

FEATURES

A. Rapid react with water, fast foaming expand and cure. The reaction time can be adjusted according to the amount of component A, generally can be controlled to cure in tens of seconds to minutes.

B. Chemical stability is excellent.

C. High strength. The compressive strength can go over 20MPa within a few hours when molding under airtight conditions;

D. With large infiltration radius and solidification volume ratio, rapid chemical reaction. When the material encounter water, great expansion pressure will be generated to push the slurry deep into the crack to form a tough consolidation.

TYPICAL INDEX 

item

index

A component CAT.

B component PU

appearance

Light yellow transparent liquid

Tan transparent liquid

density /g/cm3

1.05-1.10

1.15-1.25

viscosity/mpa·s(23±2℃)

≤60

≤600

nonvolatile matter content/%

-

≥90

REACTION TIME

The reaction time depends not only on the rock temperature, but also on the product temperature.The reaction time under different catalyst dosage is measured under laboratory conditions, and it is better to conduct field experiments before grouting.

Temperature is 20℃,the reaction time of 10%water with different amounts of component A.

Component A

5%

10%

15%

20%

Start reaction(s)

15

13

10

10

End reaction(s)

90

60

50

50

expansion rate

Approximate 30times

Approximate 30times

Approximate 30times

Approximate 30times

CURING PERFORMANCE

item

Index

Density /g/cm3

1.05-1.3

Viscosity /mpa·s(23±2℃)

300-600

Setting time /s

≤90

Solid content/%

≥82

Foaming rate/%

≥2000

Compressive strength /MPa

≥20

PS:Setting time can be adjusted according to customer needs;

APPLICATION

A. Seam sealing and waterproof anticorrosive coating of pool, water tower, basement, air raid shelter and other buildings;

B. Anticorrosion of metal and concrete pipelines and steel structures;

C. Dust treatment ,underground tunnel or building foundation reinforcement;

D. Sealing and strengthening of deformation seams, construction joints and structural cracks in construction projects;

E. Sealing leakage and strengthening ports, wharves, piers, dams and hydropower stations;

F. Wall protection and leak plugging in geological drilling, selective water plugging in oil exploitation, and water stop-gushing in the mine, etc.

PACKAGING, STORAGE AND TRANSPORTATION

A. The product shall be stored in clean, dry and airtight iron drums with a volume of 20kg/ drum or 10kg/ drum;

B. Avoid rain, exposure, extrusion and collision during transportation to ensure the package is in good condition;

C. The product should be stored in a ventilated, dry and cool place to avoid direct sunlight and rain.Storage temperature should not be higher than 40 ℃;

D. Under normal storage conditions, the storage time is 6 months