2019 High quality Water Heater Series - PU mould glue system – INOV

PU mould glue system

CHARACTERISTICS

Substitute for Silicon rubber to make the mould of “cultural stone”. Excellent processing properties, cold cured, shorter gel time, and regulating colours by adding pigment. Specially used into shoe mould.

Good abrasive resistance, hydrolysis resistance, transparent, good resilience, stable dimension for finish products.

SPECIFICATION

B Type DM1295-B DM1260-B DM1360-B
Appearance Colorless or light yellow transparent liquid
Viscosity(30℃)mPa·s/ 670±150 1050±150
A Type DM1260-A DM1270-A DM1280-A DM1290-A DM1250-A DM1340-A
Appearance Light yellow liquid
Viscosity(30℃)/mPa·s 1700±200 3600±200 1300±200

Ratio A:B(mass ratio)

1.4:1

1.2:1

1:1

0.7:1

1:1

1:0.6

Operation temperature/℃

25~40

Gel time(30℃)*/min

13~14

13~14

6~8

6~7

15~16

16~17

Appearance

Light yellow liquid

Hardness (shore A)

60±3

70±2

80±2

90±2

50±3

40±3

AUTOMATIC CONTROL

The production is controlled by DCS system, and packing by automatic filling machine. Package is 200KG/DRUM Or 20KG/DRUM.