Inov Polyurethane Mould Adhesive Products for Production Moulds

PU mould glue system

CHARACTERISTICS Substitute for Silicon rubber to make the mould of “cultural stone”. Excellent processing properties, cold cured, shorter gel time, and regulating colours by adding pigment. Specially used into shoe mould. Good abrasive resistance, hydrolysis resistance, transparent, good resilience, stable dimension for finish products. SPECIFICATION

B	Type	DM1295-B				DM1260-B	DM1360-B
	Appearance	Colorless or light yellow transparent liquid
	Viscosity（30℃）mPa·s/	670±150				1050±150
A	Type	DM1260-A	DM1270-A	DM1280-A	DM1290-A	DM1250-A	DM1340-A
	Appearance	Light yellow liquid
	Viscosity（30℃）/mPa·s	1700±200			3600±200	1300±200
Ratio A：B（mass ratio）		1.4:1	1.2:1	1:1	0.7:1	1:1	1:0.6
Operation temperature/℃		25～40
Gel time（30℃）*/min		13~14	13~14	6~8	6~7	15~16	16~17
Appearance		Light yellow liquid
Hardness （shore A）		60±3	70±2	80±2	90±2	50±3	40±3

AUTOMATIC CONTROL The production is controlled by DCS system, and packing by automatic filling machine. Package is 200KG/DRUM Or 20KG/DRUM.