INTRODUCTION
DonCool 106 blend polyols use CP mixed with HFO-1233zd as blowing agent, it applies to refrigerators, freezers, electric water heaters and other products thermal insulation, the characteristics are as follows,
1-Excellent flowability, foam density distributes uniformity, low thermal conductivity
2- Outstanding low temperature dimension stability and cohesiveness
3-Demoulding time is 4-8min.
PHYSICAL PROPERTY
Appearance |
Yellowish-brown transparent liquid |
Hydroxyl Value mgKOH/g |
320-370 |
Dynamic Viscosity /25℃ mPa.s |
4000-5000 |
Specific Gravity /20℃ g/ml |
1.05-1.10 |
Storage Temperature ℃ |
10-20 |
Shelf life (unmixed materials)※ Month |
3 |
Shelf life (premixed materials) ※ Month |
1 (Material Temperature below 20℃) |
※Store in dry original drums/IBCs at recommended storage temperature.
RECOMMENDED RATIO
pbw |
|
DonCool 106 blend polyols |
100 |
CP |
12.5 |
LBA |
7 |
ISO |
143.4-149.4 |
TECHNOLOGY AND REACTIVITY CHARACTERISTICS (Material Temperature is 20℃, the actual value varied as per process conditions)
Manual Mixing(low pressure machine) |
High Pressure Machine Mixing |
|
Cream Time s
Gel time s Tack free time s Free density kg/m3 |
8-10 70-80 100-130 23-23.5 |
6-8 50-70 70-100 22-23 |
FOAM PERFORMANCES
Moulding Density | GB/T 6343 | 30-32kg/m3 |
Closed-cell rate | GB/T 10799 | ≥90% |
Thermal Conductivity(10℃) | GB/T 3399 | ≤18.5 mW/(m.K) |
Compressive strength | GB/T 8813 | ≥140kPa |
Dimensional stability 24h -20℃ | GB/T 8811
|
≤1.0% |
24h 100℃ |
≤1.5% |
The data provided above are typical value, which are tested by our company. For our company's products, the data included in the law do not have any constraints.