Good quality Polyether/Tdi Type – Common Injection TPU Series – INOV

Product Detail

COMMON INJECTION TPU Series

CHARACTERISTICS Polyester based Hardness: shore A 62- shore A 90 Good processability, short cycle time, excellent mechanical properties Shoe sole & accessories, sandy shoe, wheel, compounding, tool wear, and other injection products. SPECIFICATION

item	Specific gravity	Hardness	Tensile strength	Ultimate elongation	100% modulus	300% modulus	Tear strength	Processing temperature
Unit	g/cm³	Shore A	MPa	%	MPa	MPa	KN/m	℃
T3160	1.18	62	19	950	3	4	72	150-170
T3165	1.18	67	20	900	4	5	75	155-175
T3170	1.20	72	22	870	3	4	85	165-190
T3175	1.21	75	24	890	4	5	91	170-195
T170	1.20	72	30	740	3	7	90	190-205
T175	1.20	76	33	700	4	8	95	195-210
T3375	1.21	75	23	850	3	5	90	170-195
T3180	1.22	81	27	750	4	7	105	180-200
T3185	1.22	86	30	640	5	8	115	185-205
T3190X	1.22	91	38	580	10	17	140	200-215