INTRODUCTION
This series of polymer polyols are mainly grafted with ordinary polyether polyols. According to the different needs of customers, they are prepared into different solid contents. Mainly used in the production of polyurethane flexible foam.
APPLICATION
Mattress, Furniture and other flexible foam.
TECHNICAL DATA SHEET
|
Brand |
OHV (mgKOH/g) |
Viscosity (mPa.s/25℃) |
H2O content (%) |
Acid Value (mgKOH/g) |
Solid Content (%) |
Application |
|
INOVOL F3610 |
41.5-45.5 |
800-1000 |
≤0.05 |
≤0.05 |
10 |
Polymer polyol 3610 is a graft copolymer polyol based on Styrene and acrylonitrile. It is designed mainly for the manufacture of flexible slab stock foams to enhance the load bearing capability. |
|
INOVOL F3613 |
38.5-44.5 |
700-1100 |
≤0.05 |
≤0.05 |
13-15 |
Polymer polyol 3613 is a graft copolymer polyol based on Styrene and acrylonitrile. It is designed mainly for the manufacture of flexible slab stock foams to enhance the load bearing capability. |
|
INOVOL F3625 |
36-42 |
1100-2100 |
≤0.05 |
≤0.05 |
23-25 |
Polymer polyol 3625 is a graft copolymer polyol based on Styrene and acrylonitrile. It is designed mainly for the manufacture of flexible slab stock foams to enhance the load bearing capability. |
|
INOVOL F3645 |
28.5-32.5 |
4000-5500 |
≤0.08 |
≤0.02 |
42-45 |
Polymer polyol 3645 is a graft copolymer polyol based on Styrene and acrylonitrile. It is designed mainly for the manufacture of flexible slab stock foams to enhance the load bearing capability. |